Mitsubishi Electric GOT2000 Connection Manual page 292

(4) Transmission speed setting switch (SW4)
Set the same transmission speed of the GOT.
For the transmission speed setting on the GOT side,
refer to the following.
9.4.1 Setting communication interface
(Communication settings)
*1
Setting
0
SW4
1
2
*1 Indicates only the transmission speeds that can
be set on the GOT side.
(5) Terminator switch(SW7)
Settings
ON
SW7
OFF *2
ON
*2 Set to ON only for the terminal station.
9 - 14
9. CONNECTION TO SHARP PLC
9.5 PLC Side Setting
Setting details
19200bps
9600bps
4800bps
Setting details
Terminating resistor validated