Got Side Settings - Mitsubishi Electric GOT2000 Connection Manual

12.2.4 GOT Side Settings


Setting communication interface
(Communication settings)
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: TOSHIBA
• Controller Type: TOSHIBA PROSEC T/V
• I/F: Interface to be used
• Driver: TOSHIBA PROSEC T/V
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
1.1.2 I/F communication setting
12 - 8
12. CONNECTION TO TOSHIBA PLC
12.2 Serial Connection
Click!
[Controller Setting] from the

Communication detail settings
Make the settings according to the usage environment.
3.
Item
4.
Transmission
Speed
Data Bit
Stop Bit
Parity
Retry
Timeout Time
Delay Time
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication Settings]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
Description
Set this item when change the
transmission speed used for
communication with the connected
equipment.
(Default: 9600bps)
Set this item when change the data
length used for communication with the
connected equipment.
(Default: 7bits)
Specify the stop bit length for
communications.
(Default: 2bit)
Specify whether or not to perform a
parity check, and how it is performed
during communication.
(Default: Even)
Set the number of retries to be
performed when a communication
error occurs.
(Default: 0time)
Set the time period for a
communication to time out.
(Default: 3sec)
Set this item to adjust the transmission
timing of the communication request
from the GOT.
(Default: 0ms)
Range
4800bps,
9600bps,
19200bps
7bit (fixed)
2bit (fixed)
Even (fixed)
0 to 5times
1 to 30sec
0 to 300 (ms)