Panasonic Industrial Devices Sunx Plc (Panasonic Mewnet-Fp) - Mitsubishi Electric GOT2000 Connection Manual

15.6.1 Panasonic Industrial Devices SUNX PLC (Panasonic MEWNET-FP)

Device name
*2*3
Input relay (X)
*3
Output relay (Y)
Internal relay (R)
*2
Special relay (R)
*5
Link relay (L)
*2*4
Timer contact (T)
*2*4
Counter contact (C)
Word device bit
*2
Input relay (WX)
Output relay (WY)
Internal relay (WR)
*2
Special relay (WR)
Link relay (WL)
Timer/Counter (Elapsed value) (EV)
Timer/Counter (Set value) (SV)
Data register (DT)
Special data register (DT)
*5
Link register (LD)
*5*6
File register (FL)
Bit device word
*1 The above device range is for the case where FP10SH is used.
For FP0, FP1, FP2, FP3, FP5, FP-10(S), or FP-M, device ranges are different in individual CPUs.
*2 Writing to device is not allowed.
*3 Only those devices that have been assigned to I/O contacts by peripheral software can be used.
*4 The device points of the timer and counter differs depending on the head numbers of the counter set by the value of the system
register (No. 5).
*5 This device does not exist in FP0, FP1, and FP-M.
*6 When FP2SH is used, one bank of "32765
X0000
Y0000
R0000
R9000
L0000
T0
C0
Specified bit of the following word devices
(except input relay, output relay, internal relay, special relay
WX000
WY000
WR000
WR900
WL000
*4
EV0
*4
SV0
DT0
DT0
DT90000
LD0
FL0
(Except Timer contact and Counter contact)
3 banks" can be monitored.
15. CONNECTION TO PANASONIC INDUSTRIAL DEVICES SUNX PLC
Setting range
to X511F
to Y511F
to R886F
to R911F
to L639F
to T3071
to C3071
and link relay)
to WX511
to WY511
to WR886
to WR911
to WL639
to EV3071
to SV3071
to DT10239
to DT32764
to DT90511
to LD8447
to FL32764
Converting bit devices into word
15.6 Device Range that Can Be Set
*1
Device No.
representation
Decimal +
Hexadecimal
Decimal
-
Decimal
-
15
15 - 21