Global Signal On/Off (Command: 1618) - Mitsubishi Electric MELSEC IQ-R series Reference Manual

Global signal ON/OFF (command: 1618)

Turn ON/OFF the global signal from an external device.
Message format
The following shows the message format of the request data and response data of the command.
■Request data
Command Subcommand
■Response data
There is no response data for this command.
Data specified by request data
■Command
ASCII code
1 6 1 8
31 36 31 38
H H H H
■Subcommand
Item
OFF
ON
■Global signal specification
Specify which global signal (X1A or X1B) is turned ON/OFF.
Global signal to be turned ON/OFF
Global signal at the side where command was
received
• Received from CH1: X1A
• Received from CH2: X1B
X1A regardless of the interface
X1B regardless of the interface
The target station (all stations/only 1 specified station) of which global signal is turned ON/OFF is specified by
a station No.
Page 50 Station No.
13 SERIAL COMMUNICATION MODULE DEDICATED COMMANDS
256
13.2 Global Function
Global signal
specification
Binary code
18 16
H H
ASCII code
0 0 0 0
30 30 30 30
H H H H
0 0 0 1
30 30 30 31
H H H H
ASCII code
0 0 0 0
30 30 30 30
H H H H
0 0 0 1
30 30 30 31
H H H H
0 0 0 2
30 30 30 32
H H H H
Binary code
00 00
H H
01 00
H H
Binary code
00 00
H H
01 00
H H
02 00
H H