About This Manual - Panasonic KX-TVM50 Programming Manual

Introduction

About this Manual

This Programming Manual is designed to serve as an overall reference for programming the
Panasonic Voice Processing System using KX-TVM/NCV Maintenance Console. It explains how to
use KX-TVM/NCV Maintenance Console, and obtain the most out of system administration.
The Programming Manual is divided into the following sections:
Section 1, Programming Instructions
Describes how to install, start, and operate KX-TVM/NCV Maintenance Console.
Section 2, KX-TVM/NCV Maintenance Console Operating Instructions
Describes in detail each parameter that can be programmed using KX-TVM/NCV Maintenance
Console.
Glossary
An alphabetical listing of features, terms, and abbreviations, as well as their definitions.
Index
An alphabetical listing of features and terms, as well as the page numbers of related sections.
About the Other Manuals
The following manuals are available:
Installation Manual
The Voice Processing System Installation Manual provides instructions for installing the VPS
hardware, configuring the connected PBX for use with the VPS, and getting started with the KX-TVM/
NCV Maintenance Console software. Relevant sections from the Installation Manual are listed
throughout this manual for your reference.
Feature Manual
The Voice Processing System Feature Manual is an overall reference describing VPS features. It
explains what the VPS can do, and how to obtain the most of its many features. Sections from the
Feature Manual are listed throughout this manual for your reference.
Subscriber's Manual
The Voice Processing System Subscriber's Manual describes how subscribers can access
commonly used VPS features and functions with their extensions and mailboxes. Relevant sections
from the Subscriber's Manual are listed throughout this manual for your reference.
Note
• This manual may refer to products not available in your country/area.
• Model number suffixes are omitted throughout this manual.
• For KX-TD500, KX-TDA series PBXs, the term "trunk" used in this manual indicates a trunk
group.
2 Programming Manual