Panasonic KX-TVM50 Programming Manual page 94

2.4 Service Settings
Date Period 1–5, Outside
<Period 1–5>
Specifies the name of date period for reference, start and end date, and an operation.
<Outside>
Allows you to specify an operation that is enabled on all other dates not included in the set periods.
Value Range
<Period 1–5>
Name: Max. 16 characters
Date: MM/DD (MM: Month, DD: Day)
Operation: Tr to Mbx, Tr to Ext, Operator, Tr to Out, Exit, Prev Menu, CS, VM Serv, Call Tr Serv,
Subscriber Serv, Dial by Name, Repeat Menu, Main Menu, Fax Tr, List All Names, None (see "Keypad
Assignment 0–9, *, #")
<Outside>
Name: Max. 16 characters
Operation: Tr to Mbx, Tr to Ext, Operator, Tr to Out, Exit, Prev Menu, CS, VM Serv, Call Tr Serv,
Subscriber Serv, Dial by Name, Repeat Menu, Main Menu, Fax Tr, List All Names, None (see "Keypad
Assignment 0–9, *, #")
Feature Manual References
2.2.16 Custom Service
Time Control
This service allows you to assign a different operation for up to 5 blocks of time during the day. The
caller makes no selection and no menu is announced.
Description
The information typed in this field is for reference only.
Value Range
Max. 32 characters
Feature Manual References
2.2.16 Custom Service
Time Period 1–5, Outside
<Period 1–5>
Specifies the name of time period for reference, start and end time, and an operation.
Note
• When the start time is specified and the end time is "Not Set", the period will be automatically
ended at "00:00".
• If several time periods overlap each other, the time period beginning with the lowest number
has a priority: the operation assigned to the lowest numbered time period is activated for the
overlapped time period.
<Outside>
94 Programming Manual