Utility-Default Parameters; Utility-Set Language - Panasonic KX-TVM50 Programming Manual

Value Range
1–65535
1.8.13 Utility—Default Parameters
Specifies TVM/NCV Type, Mailbox No. Length, System Manager's Mailbox No., Message Manager's
Mailbox No., PBX Type, Integration Mode, and some parameters as the default settings.
Follow the steps below for Default Parameters:
1.
Click Utility in the menu bar.
2.
Select Default Parameters.
Set Default
1.
Select "Set Default".
2.
Specify TVM/NCV Type, PBX Type, Integration Mode, and set parameters.
3.
Click OK.
Load Default: Loads the parameters programmed in "Set default" to the VPS.
1.
Select "Load Default".
1.8.14 Utility—Set Language
Allows you to change the display language of KX-TVM/NCV Maintenance Console.
Note
• In order to use this feature, you need to upgrade the KX-TVM/NCV Maintenance Console
software on a PC connected to the VPS.
Follow the steps below for Set Language:
1.
Click Utility in the menu bar.
2.
Select Set Language.
3.
Select the language.
4.
Click OK.
1.8 Utility
Programming Manual 33