Hitachi IJ PH Service Manual page 68

3.2.6 LCD assembly Replacement Procedure
1 Turn off the power supply.
2 Remove the fixing screws(4 pieces) and the harness from the clamps
(2 positions) of the CCB cover and remove the CCB cover.
CCB Cover
3 Remove the fixing screw of the SUS ball chain and the fixing screw
of the clamp and then remove the harness from the clamps (2 positions)
and remove the connector from CN3.
Connector (CN3)
Clamps
(2 positions)
Harness
Fixing screw
Clamp
Fixing screw
3-13
Fixing screws
(4 pieces)
Clamps
(2 positions)
SUS ball chain