Hitachi IJ PH Service Manual page 81

3.3.4 EZJ99 board (Optional board)
As for the copy data
function, see "2.9
Backup".
Fixing Screw
[Function]
Serves as an optional signal interface for the host equipment.
[Note at the setting]
- Confirm the included parts, and set it in accordance with setting procedure.
[Included parts]
Hexagonal spacer
(2 pieces)
Ferrite core
(1 piece)
[Setting procedure]
(1) Save the current data to Memory card .
(2) Turn the power off.
(3) Remove electrical component cover (fixed by the two screws), and the plastic plate
from the bottom it.
Electrical
component cover
Resin spacer
component cover
Fixing Screw
Plastic plate
3-26
(2 pieces)
Screw
(2 pieces)
Electrical