Introduction; Scope Of Functions And Supported Sinumerik Control Systems - Siemens SINUMERIK 840D sl Operating Manual

Introduction

2.1

Scope of functions and supported SINUMERIK control systems

The "SINUMERIK Integrate Access MyMachine /P2P (PC)" tool (previously "RCS
Commander") supports the commissioning and maintenance of machines with SINUMERIK
Operate as of software version 2.6 using a standard Windows PC.
From here on, the following terms/abbreviations are used synonymously in this document:
"Access MyMachine" and "AMM".
Functionality
AMM allows simple file management on your PC and on the SINUMERIK controls.
AMM provides the following functions:
● Exchanging data between the SINUMERIK control and your PC.
● Generating and restoring an image from the CompactFlash card of your control to backup
data.
● Writing images to a CompactFlash card.
● Loading of all files relevant for the commissioning directly to the CompactFlash card of your
SINUMERIK control, and loading these files from the control to your PC.
● Managing the NC data of the SINUMERIK control (part programs: *.mpf, *.spf).
You can copy files directly from the PC to the NC and from the NC to the PC.
● Process monitoring and remote control of the SINUMERIK via a remote control function
using VNC.
● Saving the screenshot of the HMI on the PC.
This function is used to represent your control and improves support in the event of an error.
● User-friendly editing of the following OEM files on the PC (Page 149):
– PLC alarm texts
– Color attribute files
– Configuration files
– Cycle alarm texts
– Part program messages
– EasyScreen files
– Tool management texts
– EasyExtend files
– Maintenance scheduler files
– Archives
● Creating and loading an archive from the control.
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
2
11