Operator control (software)
6.2 Project
5. Select the storage location of the project on the PC.
6. The project is created and opened in the project dialog with "Save".
If a project already exists, an error message appears.
Figure 6-10
6.2.3
Create a project and read the files from the control system (ONLINE)
Operating sequence
1. Establish a connection to a control system (see Connection to the control (Page 21)).
2. To create a project from the control, and automatically transfer all relevant files, select
"File > New > Read out project from machine" in the menu of the main window (this menu
item is only activated if a connection to a control has been established).
92
Project dialog (OFFLINE)
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA