Siemens SINAMICS S120 Commissioning Manual page 47

STARTER via PROFIBUS (example with two CU320 and a CU310 DP)
Figure 2-1
Settings in STARTER for direct online connection via PROFIBUS
The following settings are required in STARTER for communication via PROFIBUS:
● Extras -> Set PG/PC interface
Add/remove interfaces
● Extras -> Set PG/PC interface... -> Properties
Commissioning
Commissioning Manual, (IH1), 07/2007 Edition, 6SL3097-2AF00-0BP7
STARTER via PROFIBUS (example with two CU320 and one CU310DP)
Activate/deactivate "PG/PC is the only master on the bus".
Commissioning
2.2 STARTER commissioning tool
47