Activating Online Operation: Starter Via Profinet Io - Siemens SINAMICS S120 Commissioning Manual

Commissioning
2.2 STARTER commissioning tool
Note
• Baud rate
• PROFIBUS addresses
2.2.3

Activating online operation: STARTER via PROFINET IO

Description
The following options are available for online operation via PROFINET IO:
● Online operation via IP
Prerequisites
● STARTER with version ≥ 4.0
● PST Primary Setup Tool Version ≥ 3.0
● Firmware version ≥ 2.4
● CBE20 (not for CU310 PN. available from around July 2006)
48
Switching STARTER to a working PROFIBUS:
STARTER automatically detects the baud rate used by SINAMICS for the PROFIBUS.
Switching the STARTER for commissioning:
The Control Unit automatically detects the baud rate set in STARTER.
The PROFIBUS addresses for the individual drive units must be specified in the
project and must match the address settings on the devices.
The Primary Setup Tool is available on the STARTER CD or it can be downloaded free of
charge from the Internet:
http:/support.automation.siemens.com/WW/view/de/19440762
When CBE20 is inserted, cyclic communications via PROFIBUS are no longer possible.
Commissioning Manual, (IH1), 07/2007 Edition, 6SL3097-2AF00-0BP7
Commissioning