Extra Inlet Valves - GE AKTA avant User Manual

Hide thumbs Also See for AKTA avant:

Table of Contents

4 Optional instrument modules

4.3 Extra inlet valves

Introduction

In the ÄKTA avant standard configuration, 7 inlets are available for each inlet valve. To

increase the number of inlets, a second inlet valve can be installed that increases the

number of inlets to 14 for one of the valves. This optional configuration can be convenient

for example when a larger number of samples will be used.

There are also general inlet valves which can be used to increase the number of inlets

to for example the Quaternary valve.

Location of ÄKTA avant inlet

Second Inlet valves (V9-A2, V9-B2 or V9H-A2, V9H-B2) or second Sample inlet valve (V9-

S2 or V9H-S2) can be installed in the lower free position as illustrated below. To obtain

an optional flow path, it is also possible to move the standard valves to other positions.

The general inlet valves are delivered without built-in air sensors.

ÄKTA avant User Manual 29035184 AE