7 Maintenance
7.6 Maintenance when required
7.6.5 Clean Fraction collector F9-R
7.6.5
Clean Fraction collector F9-R
Maintenance interval
Clean the Fraction collector when required, for example in case of liquid spill.
Required material
The following materials are required:
•
•
Clean the instrument
Follow the instructions below to clean the instrument externally.
Step
1
2
3
4
Clean DropSync sensor
Clean the drop sensor photocell located above the tube sensor (see Front view illustration,
on page 131) with a damp cloth.
304
Water or 20% ethanol
Cloth
Action
Check that no run is in progress.
Switch off the instrument.
Wipe the surface with a damp cloth. Wipe off stains using a mild cleaning
agent or 20% ethanol. Wipe off any excess.
Let the Fraction collector F9-R dry completely before restart.
ÄKTA avant User Manual 29035184 AE