GE AKTA avant User Manual page 212

5 Operation
5.8 Fractionation
5.8.2 Prepare Fraction collector F9-R
Inserts
Tube guide
Tube holder
1
Assembly instructions
Follow the instructions to assemble the tube rack.
Step
1
2
212
30 to 50 mm
tubes
Single cutout
Single cutout
For 30 to 50 mm tubes, first insert the tube guide from the 18 mm rack using the single cutout,
before inserting the tube support for the 30 mm rack.
Action
Insert the tube support (4), if required, into the bowl (3). The circular marks
on the tube support should face down.
6
Note:
When assembling a tube rack, single cutouts (1) and L-shaped cutouts (2), are
used for various inserts depending on the length of the collection tubes. See
Single and L-shaped cutouts, on page 211 for detailed information.
Insert the tube guide (5) with the tube position numbers upwards. The tube
guide should rest about 1 cm above the tube support.
50 to 85 mm
1
tubes
Single cutout
Single cutout
1
2
5
3
4
85 to 180 mm
tubes
L-shaped cutout
Single cutout
ÄKTA avant User Manual 29035184 AE