Mitsubishi Electric GOT2000 Series User Manual page 12

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

[PRECAUTIONS WHEN THE DATA STORAGE IS IN USE]
When removing the SD card from the GOT, make sure to support the SD card by hand as it may pop
out.
Not doing so may cause the SD card to drop from the GOT, resulting in a failure or break.
When inserting a USB device into a USB interface of the GOT, make sure to insert the device into
the interface firmly.
Not doing so may cause the USB device to drop from the GOT, resulting in a failure or break. (GT27,
GT25, and GT2107)
Before removing the USB device from the GOT, follow the procedure for removal on the utility screen
of the GOT.
After the successful completion dialog is displayed, remove the USB device by hand carefully.
Not doing so may cause the USB device to drop from the GOT, resulting in a failure or break.
[PRECAUTIONS]
When operating the Handy GOT with holding it in hand, put a hand under the hand strap on the back
to prevent dropping it.
The hand strap length is adjustable.
When unplugging the cable connected to the Handy GOT, do not hold and pull the cable portion.
Doing so can cause the unit or cable to be damaged or can cause a malfunction due to a cable
connection fault.
Do not drop or apply strong impact to the Handy GOT.
Doing so may damage the Handy GOT.
When carrying or operating the Handy GOT, hold the body of the Handy GOT.
Carrying or operating the Handy GOT by grabbing the cable portion may damage the unit and cable.
When using the emergency stop switch of the Handy GOT, use the emergency stop switch according
to your risk assessment.
When using the parallel circuit (which avoids the emergency stop status while Handy GOT is
removed), the system may not match the safety standards.
Before using the system, please check the safety standards which are required.
When the Handy GOT is exposed to the impact exceeding the impact resistance described in the
general specifications, the emergency stop switch may start chattering for its structural reason.
Before using the system, please check your conditions of use.
A - 10
CAUTION
CAUTION

Advertisement

Table of Contents
loading

Table of Contents