6.15.2
Removing the USB cable
When removing the mounted cable clamp and USB cable, refer to the following procedure.
(Cable clamp used in this example: RSG-130-V0, KITAGAWA INDUSTRIES CO.,LTD.)
Step 1.
Remove the cable clamp band
Draw out the band while pushing up the tab of the cable clamp with a screwdriver or other tools.
Step 2.
Remove the cable clamp while holding its both sides (Arrow A in the figure). Removing the USB cable
(For GT27, GT25)
(For GT2107)
Band
A
A
A
A
6.15 Installing and Removing the USB cable (GT27, GT25, GT23, GT2107)
Tab
Driver
A A
6
6 - 85