Gt25Hs-V - Mitsubishi Electric GOT2000 Series User Manual

6.12.3

GT25HS-V

Step 1.
Open the interface environmental protection cover in the arrow-pointing direction.
Step 2.
Set the SD card access switch of the GOT to OFF, and check that the SD card access LED turns off.
Step 3.
To install the SD card to the GOT, insert the SD card into the SD card interface with its front side outside.
Step 4.
Turn the SD card access switch on.
After the SD card access switch is turned on, the SD card can be used.
Step 5.
Close the interface environmental protection cover.
6 - 72
6.12 Installing the SD Card
Front
Interface environmental
protection cover
SD card
access switch
SD card inserting direction
Front
Front
MEMORY
SD card
Interface
SD card
access LED
SD card nameplate side