Installing The Battery To Gt2506Hs-V - Mitsubishi Electric GOT2000 Series User Manual

Step 5.
After installing the battery to the battery holder of the GOT, close the battery cover until it clicks.
Step 6.
Turn on the GOT.
Step 7.
Check that the battery condition is normal with the utility.
For the details of the battery condition display, refer to the following.
➠
GOT2000 Series User's Manual (Utility)
6.10.4

Installing the battery to GT2506HS-V

The following shows the battery installation procedure.
Step 1.
Make sure that the GOT power is off.
Step 2.
Loosen the environmental protection back cover screws at two points on GOT rear face to remove the
cover.
Step 3.
Insert the connector of the battery and install the battery to the GOT.
Insert the red lead as to pass it through the notch on the circuit board.
Battery cover
Battery Connector
Connector for
battery connection
Battery
Notch
Lead (Black)
Insertion
direction
Battery
Circuit
board Lead (Red)
Environmental
protection
back cover
screw
6.10 Installing the Battery
6
6 - 57