Installing And Removing The Panel-Mounted Usb Port Extension; Applicable Panel-Mounted Usb Port Extension; Parts Name - Mitsubishi Electric GOT2000 Series User Manual

6.16 Installing and Removing the Panel-Mounted USB Port Extension

Panel-mounted USB port extension is a waterproof extension cable of the USB.
It is used to pull out the USB interface (host) or the USB interface (device) on the back to the surface of the control panel.
6.16.1

Applicable panel-mounted USB port extension

The following panel-mounted USB port extensions are applicable.
Model name
GT14-C10EXUSB-4S
GT10-C10EXUSB-5S
*1 This cable is usable for GT2107-WTBD, GT2107-WTSD.
*2 This cable is usable for GT2712-STWA, GT2712-STWD, GT2710-VTWA, GT2710-VTWD.
*3 This cable is usable for GT2512F-STNA, GT2512F-STND,GT2510-VTWA, GT2510-VTWD, GT2510F-VTNA, GT2510F-VTND,
GT2508-VTWA, GT2508-VTWD, GT2508F-VTNA,GT2508F-VTND.
*4 This cable is usable for GT2104-RTBD, GT2104-PMBD, GT2104-PMBDS, GT2104-PMBDS2, GT2104-PMBLS, GT2103-PMBD,
GT2103-PMBDS, GT2103-PMBDS2, GT2103-PMBLS.
6.16.2

Parts name

The following shows the parts name of panel-mounted USB port extension.
USB plug
6.16.3

Installing and Removing the Panel-Mounted USB Port Extension

■1. Installing and removing the panel-mounted USB port extension to/from the panel
Install the panel-mounted USB port extension as follows with attention to a curve or a distortion of waterproof cap, seal,
and nut.
Panel thickness
Seal
• Cover the panel-mounted USB port extension with waterproof cap so that the panel surface is compatible with IP67F.
• Overtightening or undertightening may disable the waterproof effect.
• Tighten the waterproof cap properly when the cable is not used.
GT27
○
*2
○
Cable
Ferrite core
Model name label
Panel Cutting Dimensions
GT14-C10EXUSB-4S
Nut
Waterproof
cap
19.4±0.1
(0.77±0.01)
Panel thickness: 2 to 4mm (0.08 to 0.16inch)
Specified torque range: 0.30 to 0.34N ・ ｍ
6.16 Installing and Removing the Panel-Mounted USB Port Extension
Supported model
GT25 GT23
○ −
*3 −
○
Cap installation chart
Waterproof cap
Nut
Seal
GT10-C10EXUSB-5S
Panel thickness: 1.6 to 2mm (0.06 to 0.08inch)
Specified torque range: 0.28 to 0.32N ・ ｍ
: Available : Unavailable
, −
○
GT21
*1
○
*4
○
14.8±0.1
(0.58±0.01)
Unit: mm (inch)
6 - 87
6