Installing And Removing The Panel-Mounted Usb Port Extension; Applicable Panel-Mounted Usb Port Extension; Parts Name - Mitsubishi Electric GOT2000 Series Hardware User Manual

6.16
Installing and Removing the Panel-Mounted USB
Port Extension
The panel-mounted USB port extension is a waterproof USB extension cable.
The cable is used to route the USB interface (Host) or USB interface (Device) of the GOT rear face to the front side of the
control panel.

Applicable panel-mounted USB port extension

The following panel-mounted USB port extensions are applicable.
○: Applicable, -: Not applicable
Model name
GT14-C10EXUSB-4S
GT10-C10EXUSB-5S
*1 This cable is usable for GT2107-WTBD, GT2107-WTSD.
*2 This cable is usable for GT2712-STWA, GT2712-STWD, GT2710-VTWA, GT2710-VTWD.
*3 This cable is usable for GT2512F-STNA, GT2512F-STND, GT2510-VTWA, GT2510-VTWD, GT2510F-VTNA, GT2510F-VTND,
GT2508-VTWA, GT2508-VTWD, GT2508F-VTNA,GT2508F-VTND and GT2507T-WTSD.
*4 This cable is usable for GT2104-RTBD, GT2104-PMBD, GT2104-PMBDS, GT2104-PMBDS2, GT2104-PMBLS, GT2103-PMBD,
GT2103-PMBDS, GT2103-PMBDS2, GT2103-PMBLS.

Parts name

The following shows the parts name of panel-mounted USB port extension.
Ferrite core
USB plug
6 INSTALLATION AND REMOVAL
264

6.16 Installing and Removing the Panel-Mounted USB Port Extension

Supported model
GT27
○
*2
○
Cable
Seal
Model name label
GT25 GT23
○ -
*3
○ -
Cap installation chart
Waterproof cap
Nut
GT21
*1
○
*4
○