Removing the battery from GT2506HS-V
The following shows the battery removal procedure.
1.
Make sure that the GOT power is off.
2.
Loosen the environmental protection back cover screws at two points on GOT rear face to remove the cover.
3.
Remove the battery from the GOT, and unplug the battery connector.
4.
Attach the environmental protection back cover and tighten the screws within the specified torque range (0.36 N•m to
0.48 N•m).
Environmental
protection
back cover
screw
Connector for
battery connection
Battery
Environmental
protection
back cover
screw
6 INSTALLATION AND REMOVAL
6.11 Removing the Battery
6
241