Mitsubishi Electric GOT2000 Series Hardware User Manual page 282
Graphic operation terminal
Hide thumbs
Also See for GOT2000 Series:
- Connection manual (1224 pages) ,
- User manual (654 pages) ,
- Basic training textbook (255 pages)
Table of Contents
Advertisement
ID recognition function
When the Handy GOT is connected to a PLC CPU or other controllers by Ethernet, the GOT can acquire the ID number (set
by the rotary switch) from the connector conversion box.
ID number can be used as information for switching the station number.
When the ID number is stored to the station No. switching device by using the trigger action function or the script function,
connecting the GOT to the connector conversion box monitors the controller corresponding to the ID number.
ID
IP
1
192.168.5.50
2
192.168.5.0
5
192.168.5.25
8
192.168.5.66
When connected to a Connector Conversion Box
with ID number 8, the GOT monitors the PLC (B).
ID
IP
1
192.168.5.50
2
192.168.5.0
5
192.168.5.25
8
192.168.5.66
For details on the switching the station number, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
How to use the ID number recognition function
The ID recognition function is available only when the Handy GOT is connected with a controller by Ethernet.
To acquire the ID number, establish MODBUS/RTU communications between the RS-232 interface of the
Handy GOT and the connector conversion box.
When RS-232 interface is used by the multi-channel function, the ID number recognition function is not
available.
■Setting the ID number
Set the ID number with the rotary switch of the connector conversion box.
The setting range is 00
Set the second digit of the hexadecimal with U, and the first digit of the hexadecimal with L.
After setting the ID number, turn the ID number valid/invalid selection switch to valid (ON).
ID No.
U
L
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
280
7.1 Connector Conversion Box
When connected to a Connector Conversion Box
with ID number 1, the GOT monitors the PLC (A).
Handy GOT
IP address is
acquired from
the table in the
project.
Handy GOT
IP address is
acquired from
the table in the
project.
to FF
.
H
H
ID number: 1
ID
acquisition
ID number: 2
ID number: 5
ID number: 8
ID
acquisition
(A)
192.168.5.50
(B)
192.168.5.66
(C)
192.168.5.25
Advertisement
Table of Contents
Troubleshooting
