Mitsubishi Electric GOT2000 Series Hardware User Manual page 316

Removal procedure of the external cable (GT2506HS-V)
1.
Make sure that the GOT power is off.
2.
Pull up the lock lever with inserting a flat-blade screwdriver into the release hole of the lock lever.
Flat screwdriver
3.
Hold the coupling and pull the connector toward the cable side to remove the cable.
Installation procedure of external cable (GT2505HS-V)
1.
Make sure that the GOT power is off.
2.
Insert the connector adjusting the triangle marks of the main unit side connector and cable side connector.
(The connectors are locked after the lever is inserted.)
Removal procedure (GT2505HS-V)
1.
Make sure that the GOT power is off.
2.
Pull out the cable while turning the triangle mark side of the cable side connector to the left.
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
314
7.5 External Cable, Relay Cable
Coupling
A cable or device
(For example: a relay cable)