Gt23 - Mitsubishi Electric GOT2000 Series Hardware User Manual

GT23

Depending on the units and cables used for the GOT, the distance more than the described dimensions may be required.
Install the GOT with consideration of the connector dimensions and the cable bend radius.
For the vertical installation, install the GOT so that the vertical installation arrow printed on the GOT rear face points upward.
Page 138 GT23
B
C
A
Horizontal
D
B
C
Vertical
Unit: mm (inch)
Item
A
B
C When the SD card is used
When the SD card is not used
D
*1
E
*1 When opening or closing the battery cover: 72(2.83) or more
6 INSTALLATION AND REMOVAL
190
6.4 Installation Position
D E
Panel thickness: 1.6 mm to 4 mm(0.06 to 0.16inch)
E
A
Panel thickness: 1.6 mm to 4 mm(0.06 to 0.16inch)
GT23
GT2310-V
48(1.89) or more
[18(0.71) or more]
Horizontal: 78(3.07) or more [18(0.71) or more]
Vertical: 50(1.97) or more [20(0.79) or more]
Horizontal: 50(1.97) or more [20(0.79) or more]
Vertical: 80(3.15) or more [20(0.79) or more]
Horizontal: 50(1.97) or more [20(0.79) or more]
Vertical: 80(3.15) or more [20(0.79) or more]
50(1.97) or more
[20(0.79) or more]
100(3.94) or more
[20(0.79) or more]
GT2308-V
Horizontal: 50(1.97) or more
Vertical: 80(3.15) or more [50(1.97) or more]