GT25HS-V
The following shows the installation procedure, taking GT2506HS-V as an example.
1.
Open the interface environmental protection cover in the arrow-pointing direction.
Front
2.
Turn off the SD card access switch, and check that the SD card access LED turns off.
Interface environmental
protection cover
SD card
SD card
access switch
access LED
3.
Insert an SD card into the SD card interface with its front side (label side) facing toward the GOT rear face.
Insertion direction
Front
4.
Turn on the SD card access switch.
The SD card becomes accessible afterward.
5.
Close the interface environmental protection cover.
Front
MEMORY
SD card
Interface
SD card label side
6 INSTALLATION AND REMOVAL
6.12 Installing the SD Card
6
251