Installing To/Removing From Panel - Mitsubishi Electric GOT2000 Series Hardware User Manual

Installing to/removing from panel

Installing the Connector Conversion Box
■Configuration
The following shows the configuration for using the GOT that is connected to the connector conversion box on a control panel
or operation panel.
Handy GOT
3）
○: Usable, -: Not usable
1) PLC connection cable
Cable selected or created
according to the communication
method and controller
Select the cable according to the communication method and controller.
For the cable selection, refer to the following.
GOT2000 Series Handy GOT Connection Manual For GT Works3 Version1
■Panel cutting dimensions for Connector Conversion Box
The Connector Conversion Box can be installed on the panel face directly or with mounting bracket offered as an accessory.
For details on installing procedure and panel cutting dimensions, refer to the following.
Page 267 Connector Conversion Box
6 INSTALLATION AND REMOVAL
220
6.8 Handling the Handy GOT
Control panel or
operation panel
2）
2) Connector conversion box
GT16H-CNB-42S
GT16H-CNB-37S
GT11H-CNB-37S
PLC
1）
3) External cable
GT16H-C30-42P
GT16H-C60-42P
GT16H-C100-42P
GT14H-C30-42P
GT14H-C60-42P
GT14H-C100-42P
GT16H-C30-37PE
GT16H-C60-37PE
GT16H-C100-37PE
GT11H-C30-37P
GT11H-C60-37P
GT11H-C100-37P
GT11H-C30-37P
GT11H-C60-37P
GT11H-C100-37P
4) Handy GOT
GT2506HS-V GT2505HS-V
○ -
○ -
○ -
- ○
- ○
- ○
○ -
○ -
○ -
- ○
- ○
- ○
- ○
- ○
- ○