Connector Conversion Box (Gt16H-Cnb-37S) - Mitsubishi Electric GOT2000 Series Hardware User Manual

Connector conversion box (GT16H-CNB-37S)

Specifications
■General specifications
Other specifications are the same as Handy GOT.
Item Specifications
Operating ambient 0 °C to 55 °C
temperature
Storage ambient -20°C to 60°C
temperature
Vibration resistance When installing DIN rail
■Power supply specifications
Other specifications are the same as Handy GOT.
Item Specifications
Input power supply voltage 24 V DC (+10% -15%)
Power consumption 13.7 W or less (570 mA/24 V DC) (When including the consumption current of Handy GOT)
Connector 2.2 W (90 mA/24 V DC) (When excluding the consumption current of Handy GOT)
conversion
box only
Inrush current 25 A or less (at max. load) 2 ms
Permissible instantaneous Within 5 ms
power failure time
■Internal relay contact specifications
Item Contact rating
Operation switch 10 mA/24 V DC
SW1 to SW6 (resistance load only)
Emergency stop switch 1 A/24 V DC (resistance
ES1 to ES3 load)
0.3 A/24 V DC (induction
load)
Grip switch 1 A/24 V DC (resistance
DSW1, DSW2 load)
0.3 A/24 V DC (induction
load)
Keylock switch (2-position 1 A/24 V DC (resistance
switch) load)
KSWC, KSW1, KSW2 0.3 A/24 V DC (induction
load)
Frequency Acceleration
5 Hz to 8.4 Hz —
2
8.4 Hz to 150 Hz 4.9 m/s
Specifications
Each contact coordinates the operation switch status of Pressed (close)/Not pressed (open).
When the external cable is not connected, contacts are always open regardless of the switch status.
Each contact coordinates the emergency stop switch status of Pushed (open)/Return (close).
When the external cable is not connected, contacts are always open regardless of the emergency
stop switch status.
Each contact coordinates the grip switch status of Pressed (close)/Not pressed (open).
When the external cable is not connected, contacts are always open regardless of the grip switch
status.
Each contact coordinates the position of the keylock switch.
• When the key is on the left: KSW1 and KSWC are short-circuited.
• When the key is on the right: KSW2 and KSWC are short-circuited.
When the external cable is not connected, contacts are always open regardless of the keylock
switch.
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
Half-amplitude Sweep Count
1.75 mm 10 times each in X, Y and Z
directions
—
7.1 Connector Conversion Box
7
287