Installation procedure of external cable (GT16H-CNB-42S)
1.
Make sure that the GOT power is off.
2.
Insert the connector adjusting the triangle marks of the main unit side connector and cable side connector.
3.
After inserting the connector, push the lock lever. The connectors are locked after the lever is pushed into.
Removal procedure (GT16H-CNB-42S)
1.
Make sure that the GOT power is off.
2.
Pull up the lock lever with inserting a flat-blade screwdriver into the release hole of the lock lever.
Flat screwdriver
3.
Hold the coupling and pull the connector toward the cable side to remove the cable.
Coupling
7 OPTION AND COMMUNICATION CABLE FOR HANDY GOT
7.5 External Cable, Relay Cable
7
315