Gt21 - Mitsubishi Electric GOT2000 Series Hardware User Manual

GT21

The following shows an installation example for the horizontal direction.
For the vertical installation, install the GOT so that the power supply terminal, which is located on the GOT rear face, is at the
lower side.
When installing GT2107-W vertically, make sure that the power supply terminal on the GOT rear face is at the upper side.
Page 117 PART NAMES AND SETTINGS
GT21
Cautions for an installation panel
Use a panel that has no warpage, damage, and unevenness on its surface. Failure to do so may not result in
waterproof effect.
Determine the panel thickness considering the panel strength.
(For example, even though the panel has thickness within the range, the strength may be insufficient
depending on the material and size. Insufficient panel strength may result in warpage depending on the
installation position of the GOT and other devices.)
1.
Install a packing to the packing installation groove on the GOT rear face. (except GT2107-W)
Packing
Enlarge
2.
Insert the GOT rear face into the panel opening. (The following shows an example of the horizontal installation.)
6 INSTALLATION AND REMOVAL
208
6.6 Installing the GOT
Packing
Packing
installation groove
Panel opening