Mitsubishi Electric GOT2000 Series User Manual page 85

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

Item
Buzzer output
POWER LED
Protective structure
External dimensions
Weight (excluding a fitting)
Compatible software package
*1
As a characteristic of liquid crystal display panels, bright dots (always lit) and dark dots (never lit) may appear on the panel.
Since liquid crystal display panels comprise a great number of display elements, the appearance of bright and dark dots cannot
be reduced to zero.
Individual differences in liquid crystal display panels may cause differences in color, uneven brightness and flickering.
Note that these phenomena are characteristics of liquid crystal display panels and it does not mean the products are defective or
damaged.
*2
Flickering may occur due to vibration, shock, or the display colors.
*3
When a stylus is used, the touch panel has a life of 100 thousand touches.
The stylus must satisfy the following specifications.
• Material: Polyacetal resin
• Tip radius: 0.8 mm or more
*4
To prevent the display section from burning in and lengthen the backlight life, enable the screen save function and turn off the
backlight.
*5
If you touch two points or more simultaneously on the touch panel, a touch switch near the touched points may operate
unexpectedly.
Do not touch two points or more simultaneously on the touch panel.
*6
Note that the structure does not guarantee protection in all users' environments.
The protection is not applied when the interface environment protection cover or environment protection back cover is removed.
The GOT may not be used in an environment where the GOT is exposed to oil or chemicals for a long time, or where oil mist fills
the air.
*7
The minimum size of a key that can be arranged.
To ensure safe use of the product, the following settings are recommended.
• Key size: 16 × 16 dots or larger
• Distance between keys: 16 dots or more
*8
The suffix "F" of IP67F is a symbol that indicates protection rate against oil.
It is described in the Appendix of Japanese Industrial Standard JIS C 0920.
*9
Select either RS-422/485 or RS232 when used.
The channel is set to RS-422/485 before shipping.
Single tone (tone and tone length adjustable)
(Valid when the external cable is connected. except for the relay connector side of the external cable.)
201(7.91) (W) × 230(9.06) (H) × 97(3.82) (D) mm(inch)
(Excluding projections such as the emergency stop switch)
(GT25 Handy main unit only)
GT Designer3 Version1.170C or later
Specifications
GT2506HS-VTBD
2 colors (blue and orange)
*6*8
IP65F
1.2(2.6) kg(lb)
3.2 Performance Specifications
3
3 - 29

Advertisement

Table of Contents
loading

Table of Contents