Other Ways To Fax - Dell 1600n User Manual

Other Ways to Fax

Redialing
To redial the number you last called:
Press <Redial/Pause>.
When a document is loaded in the ADF (Automatic Document Feeder; see page 118), the
machine automatically begins to send.
For the document loaded on the scanner glass, the display asks if you want to load another
page. Select "1:Yes" to add. Otherwise, select "2:No"
Sending Broadcasting Faxes
Using the <Broadcasting> button on the operator panel, you can use the broadcasting fax
feature, which allows you to send a document to multiple locations. Documents are
automatically stored in the memory and sent to a remote station. After transmission, the
documents are automatically erased from the memory.
1
2
3
4
5
6
13 2
Faxing
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the scanner glass.
For details about loading a document, see page 118.
Adjust the document resolution to suit your fax needs (see page 120).
If you need to change the contrast, see page 116.
Press <Broadcasting> on the operator panel.
Enter the number of the remote machine using the number keypad.
You can also use one, two, or three-digit speed dial or group dial numbers. For details,
see "Automatic Dialing" on page 127.
Press <Select> to confirm the number. The display asks you to enter another fax
number to send the document to.
NOTE: Your machine can send one broadcasting fax to multiple destinations. The "Enter
Number" prompt does not appear if a broadcast is set up and not completed. You must
wait until the current broadcast is completed.
If you want to enter more fax numbers, repeat steps 4 and 5. You can add up to 10
destinations.
Note that you cannot use group dial numbers for another fax number.