Side Copying - Dell 1600n User Manual

2-side Copying

You can copy a 2-sided document on one page of A4, Letter, or Legal-sized paper.
When you copy using this feature, the machine prints one side on the upper half of the
paper and the other side on the lower half without reducing the original. This feature is
helpful for copying a small-sized document, such as a name card.
If the original document is larger than the printable area, some portions may not be printed.
This special copy mode can be applied when you load a document using only the scanner
glass. If a document is detected in the ADF, the 2 Sided copying feature does not work.
NOTE: You cannot adjust the copy size using the <Reduce/Enlarge> (▼or ▲) button for 2
Sided copying.
To make the 2 Sided copying:
Load the document to be copied on the scanner glass, and close the cover.
1
Press <Layout>.
2
Press <Layout> or the scroll button ( or ) until "2 Sided" displays on the bottom
3
line.
Press <Select> to save the selection.
4
If necessary, customize the copy settings including the number of copies, copy size,
5
contrast, and image quality by using the operator panel buttons. See "Setting Copy
Options" on page 88.
Press <Start Copy> to begin copying.
6
Your machine begins scanning the front side.
When "Set Backside" displays on the bottom line, open the document cover and
7
flip the document over with the second side facing down. Close the document cover.
Press <Start Copy> again.
8
9 2
Copy ing
NOTE: If you press the <Cancel> button or if no buttons are pressed for about 30
seconds, the machine cancels the copy job and returns to Standby mode.