Using The Bypass Tray - Dell 1600n User Manual

NOTE: You can load up to
printed paper. The printed side should be facing up with an
uncurled edge at the top side. If you experience problems
with paper feed, turn the paper around. Note that the
print quality is not guaranteed.

Using the Bypass Tray

Use the Bypass tray to print transparencies, labels, envelopes or postcards in addition to
making quick runs of paper types or sizes that are not currently loaded in the paper tray.
Postcards, 3.5 by 5.83 in.(index) cards and other custom-sized materials can be printed with
this machine. The minimum size is 3.0 by 5.0 in. (76 by 127 mm) and the maximum size is
8.5 by 14 in. (216 by 356 mm)
Acceptable print materials are plain paper with sizes ranging from 3.9 by 5.8 in. (100 by 148
mm) to Legal, 8.5 by 14 in. (216 by 356 mm), the largest size acceptable, and weighing
between 16 lb and 32 lb.
NOTE: Always load only the print materials specified in the Specifications on page 206 to avoid
paper jams and print quality problems.
NOTE: Flatten any curl on postcards, envelopes and labels before loading them into the Bypass
tray.
NOTE: When you print on 3 by 5 in. (76 by 127 mm) sized media with loading into the tray,
open the rear output tray.
To use the Bypass tray:
Load a sheet of the print material with the print side face up into the center of the
1
tray.
5 4
Paper Handl ing
150 sheets of previously