Dell 1600n User Manual page 153

Condition
Background scatter
A
Misformed characters
Page skew
Curl or wave
Suggested solutions
Background scatter results from bits of toner distributed on the printed page.
• The paper may be too damp. Try printing with a different batch of paper. Do not open
packages of paper until necessary so that the paper does not absorb too much moisture.
• If background scatter occurs on an envelope, change the printing layout to avoid
printing over areas that have overlapping seams on the reverse side. Printing on seams
can cause problems.
• If background scatter covers the entire surface area of a printed page, adjust the print
resolution through your software application or the printer properties.
• If characters are improperly formed and produce hollow images, the paper stock may
be too slick. Try a different paper. See "Paper Specifications" on page 206.
• If characters are improperly formed and produce a wavy effect, the scanner unit may
need service. For service, contact a service representative.
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See "Paper Specifications" on page 206.
• Ensure that the paper or other material is loaded correctly and the guides are not too
tight or too loose against the paper stack.
• Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high temperatures and humidity can cause
paper curl. See "Paper Specifications" on page 206.
• Turn over the stack of paper in the paper tray. Also try rotating the paper 180° in the
paper tray.
177
Trou ble sho oting