Dell 1600n User Manual page 155

Condition
Character Voids
A
Horizontal stripes
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Curl
Suggested solutions
Character voids have white areas where they should be solid black:
• If you are using transparencies, try another type of transparency. Because of the
composition of the transparency, some character voids are normal.
• You may be printing on the wrong surface of the paper. Turn over the stack of paper in
the paper tray.
• The paper may not meet paper specifications. See "Paper Specifications" on page 206.
If horizontally aligned black streaks or smears appear:
• The toner cartridge may be installed improperly. Remove the toner cartridge and
reinsert.
• The toner cartridge may be defective. Install a new toner cartridge. See "Installing the
Toner Cartridge" on page 15.
• If the problem persists, the machine may require repair. Contact a service
representative.
If the printed paper is curled or the paper does not feed into the printer, turn over the
stack of paper in the paper tray. Also try rotating the paper 180° in the paper tray.
179
Trou ble sho oting