Upi Cable Routing - Dell EMC PowerEdge R940 Installation And Service Manual

Figure 65. Installing the PEM
4 Holding the PEM handle, lower the PEM until it firmly seats in place.
Next steps
1 Install the expansion card risers.
2 Install the air shroud.
3 Follow the procedure listed in
Related links
Installing the expansion card riser
Installing the air shroud

UPI cable routing

If you upgrade your system from two processor configuration to four processor, you must use UPI cables to connect the PEM to the
system board.
This image shows the PEM cable routing for a four processor system.
After working inside your system.
Installing and removing system components 111