Removing The Expansion Card Riser - Dell EMC PowerEdge R940 Installation And Service Manual

Figure 71. Installing expansion card riser blank (right)
Next steps
1 Follow the procedure listed in

Removing the expansion card riser

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Disconnect any cables connected to the expansion card.
Steps
1 Lift the release lever until the connector on the riser disconnects from the connector on the processor expansion module (PEM).
2 Lift the riser away from the system.
After working inside your system.
Safety instructions.
Before working inside your system.
Installing and removing system components 119