Network Daughter Card; Removing The Ndc - Dell EMC PowerEdge R940 Installation And Service Manual

Network daughter card

The network daughter card (NDC) is a small, removable mezzanine card, which provides the flexibility of selecting different connectivity
options.

Removing the NDC

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the Network Daughter Card (NDC) riser.
Steps
1 Using a Phillips #2 screwdriver, loosen the captive screws that secure the NDC to the NDC riser.
2 Hold the NDC by the edges on either side of the touch points, and lift to remove it from the connector on the NDC riser.
3 Slide the NDC away from the NDC riser bracket until the Ethernet connectors are clear of the slot in the NDC riser.
Figure 80. Removing the NDC
Next steps
1 Install the NDC.
Related links
Removing the NDC riser
Installing the NDC
Safety instructions.
Before working inside your system.
Installing and removing system components 127