Installing The Left Control Panel - Dell EMC PowerEdge R940 Installation And Service Manual

Figure 97. Removing left control panel
Next steps
Install the left control panel.
Related links
Removing the fan cage
Removing the air shroud
Removing the expansion card riser
Removing the PEM

Installing the left control panel

Installing the left control panel
Prerequisites
Follow the safety guidelines listed in
Steps
1 Route the control panel cable through the side wall of the system.
2 Align the control panel with the control panel slot on the system and attach the control panel to the system.
3 Connect the control panel cable connector on the system board.
4 Using Phillips #1 screwdriver, install the screws that secure the control panel to the system.
150 Installing and removing system components
Safety instructions.