Installing The Cooling Fan - Dell EMC PowerEdge R940 Installation And Service Manual

Figure 25. Removing the cooling fan
Next steps
If applicable, install the cooling fan.
Related links

Installing the cooling fan

Installing the cooling fan
Prerequisites
1 Follow the safety guidelines listed in
WARNING: Do not drop the fan into the fan cage while removing or installing the fan as this may cause damage to the
connectors on the fan tray. Exercise utmost care while removing or installing cooling fans.
Steps
1 Holding the release tabs, insert the cooling fan into the fan cage with the arrow marked on the fan pointing towards the back of the
system.
2 Lower the cooling fan until the connector on the cooling fan engages with the connector on the fan tray.
Lower the cooling fan to connect the connector on the fan to the connector on the fan tray.
72 Installing and removing system components
Safety instructions.