Adding A 1-Axis Fdd Module (As From Sw 3) - Siemens SINUMERIK 840C Installation Instructions Manual

Hide thumbs Also See for SINUMERIK 840C:

Table of Contents

5 Machine Data Dialog (MDD – as from SW 3)

5.9.2 Adding a 1-axis FDD module (as from SW 3)

Specifications

Entering the

drive configuration

Motor selection

More user manuals on

Adding a 1-axis FDD module (as from SW 3)

Module slots:

(Installation location) Slot 2:

Enter the additional 1 axis FDD module for slot 2 (installation location) in the

drive configuration display. Select the actual module type with Select module

softkey. Confirm these settings with the Accept Conf + NCKP0 softkey.

Select the actual motor type with the Enter motor softkey. Confirm this setting

with the Accept all + NCKP0 softkey.

Please make sure that you enter NC MD 3840 and 2000 correctly (assign).

The drive numbers of drives already installed must not be changed, i.e. a new

drive must be given a new drive number.

ManualsBase.com

2 axis FDD module

1 axis FDD module

SINUMERIK 840C (IA)

Simodrive 611-d