7 Drive Machine Data (SIMODRIVE Drive MD)
7.1.2 MSD MD (data description - SW 3)
242
Default value
3
A function can be assigned to programmable message 2 in this machine data.
The default setting corresponds to M
243
Default value
1
A function can be assigned to programmable message 3 in this machine data.
The default setting corresponds to n
244
Default value
4
A function can be assigned to programmable message 4 in this machine data.
The default setting corresponds to n
245
Default value
20
A function can be assigned to programmable message 5 in this machine data.
The default setting corresponds to variable relay function 1 (MD 185, see MD 241 for other
settings).
246
Default value
7
A function can be assigned to programmable message 6 in this machine data.
The default setting corresponds to variable relay function 2 (MD 190, see MD 241 for other
settings).
7–36
More user manuals on
Programmable message 2
Lower input limit
1
> M
d
Programmable message 3
Lower input limit
1
< n
act
Programmable message 4
Lower input limit
1
< n
act
Programmable message 5
Lower input limit
1
Programmable message 6
Lower input limit
1
ManualsBase.com
Upper input limit
20
(see MD 241 for other settings).
dx
Upper input limit
20
(see MD 241 for other settings).
min
Upper input limit
20
(see MD 241 for other settings).
x
Upper input limit
20
Upper input limit
20
©
Siemens AG 1992 All Rights Reserved
10.94
Active
at once
Units
–
Active
at once
Units
–
Active
at once
Units
–
Active
at once
Units
–
Active
at once
Units
–
6FC5197- AA50
SINUMERIK 840C (IA)