Programming the Instrument
Trigger Modes
The following figure shows the instrument's arming/triggering model:
:ARM Event detection layer
:ARM:SOURce IMMediate (Internal VFO)
INTernal2 (Internal PLL)
EXTernal (EXT INPUT)
Manual (MAN key)
:TRIGger Event detection layer
:TRIGger:SOURce IMMediate (Internal VFO)
INTernal2 (Internal PLL)
EXTernal2 (CLK IN)
:TRIGger:COUNt n
You program the comprehensive triggering capabilities of the instrument
using the SCPI :ARM and :TRIGger subsystems. Using these two
command subsystems you can program the operating modes of the
instrument, which are set up using the M
panel.
Programming the Instrument Trigger Modes
:ARM:SENSe EDGE (Triggered)
LEVel (Gated)
Programming Reference
armed?
yes
triggered?
yes
generate
pulse period and
increment counter
COUNTER = :TRIG:COUNt?
yes
reset counter
/T
on the front
ODE
RIGGER SCREEN
no
no
no
35