HP 81101A Reference Manual page 76

Programming Reference
SCPI Instrument Command List
Command
:STATus:PRESet
Long
:STATus:PRESet
Form
Event
*RST value Not Applicable
Description
This command
• Clears all status group event registers
• Clears the error queue
• Presets the status group enable-, PTR-, and NTR-registers as follows:
Status Group
OPERation
QUEStionable
Command
:STATus:QUEStionable
This command tree accesses the QUEStionable status group. The
QUEStionable status group contains warning bits for voltage, current,
time and frequency parameters. A warning occurs when the output signal
could be out of specification due to the combined specification
uncertainties of many parameters, although all parameters are set within
their individually specified limits. If a parameter is set outside its
specified limits an error is generated.
The following commands are used to access the registers within the
status group:
76
Register Preset value
ENABle
0000000000000000
PTR
0111111111111111
NTR
0000000000000000
ENABle
0000000000000000
PTR
0111111111111111
NTR
0000000000000000