HP 81101A Reference Manual page 89

3
3Specifications
In this chapter you will find the specifications of the HP 81101A Pulse
Generator.
At the end of this chapter, "Pulse Parameter Definitions" on page 105
provides detailed information on the definition of the pulse parameters
used by the instrument.
N O T E Warranted Performance
Specifications describe the instrument's warranted performance. Non-
warranted values are described as typical. All specifications apply after a
30 minute warm-up phase with 50 Ohm source, a 50 Ohm load resistance
and separate channels. They are valid from 0 °C to 55 °C ambient
temperature.
89