Specifications
HP 81101A Specifications
Leading and trailing edges can be programmed independently within the
following ranges (Maximum ratio 1:20):
5ns
Level Specifications
Level Parameters
Source impedance:
Maximum external voltage:
Short circuit current:
Normal/complement:
ON/OFF:
Limits:
External Load compensation
For loads ≠ 50Ω, the actual load impedance can be entered to correct the
output values.
96
HP 81101A
selectable 50 Ω ± 1% typical or 1 kΩ
±24 V
±400 mA
selectable
relay connect/disconnect output (HiZ).
high and low levels can be limited to protect the
DUT