Nameplate Description - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual
No.
12
13
14
d:




2.3 Nameplate Description

A nameplate is attached at the back of the SmartLogger. The content of the nameplate
includes the SmartLogger model, rated power supply specifications, and compliance symbols,
as shown in Figure 2-5.
(2016-06-20)
Port (Silk
Screen)
AI1–AI8
AO1–AO6
DI1–DI8
If the APP fails to connect to the SmartLogger or you have forgotten the IP address, you
can press the Default key to reset the Bluetooth module or restore the IP address to the
default IP address (192.168.0.10).
To reset and restart the Bluetooth module, press and hold down the Default key for
3–10s until the BLU indicator blinks at short intervals (0.125s on and 0.125s off) and all
other indicators are off, and then release the Default key.
To restore the IP address to the default IP address, press and hold down the Default key
for more than 10s until the RUN indicator blinks at short intervals (0.125s on and
0.125s off) and all other indicators are off, and then release the Default key. The
operation is valid within 5 minutes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Function Description
Analog input


Analog output 4–20 mA and 0–20 mA current output.
Digital parameter Connects to a dry contact input.
input
SmartLogger2000-10CN: AI1–AI4:
4–20 mA and 0–20 mA input current
(passive); AI5–AI8: 4–20mA and 0–20
mA input current (active)
Other models: AI1: 0–10 V input
voltage (passive); AI2–AI4: 4–20 mA
and 0–20 mA input current (passive);
AI5–AI8: 4–20 mA and 0–20 mA input
current (active)
2 Overview
10