Huawei SmartLogger2000 User Manual page 23

SmartLogger2000
User Manual
Component
Knife
switch
Figure 2-10 LTE+RS485/PLC
The X1 terminal block (general power input and AC output) and X2 terminal block (RS485
communications port) are in the upper part on the rear of the smart array controller.
Table 2-5 lists the components required for the LTE+RS485/PLC networking mode in the
scenario with a smart array controller.
(2016-06-20)
Recommended Model or
Specifications
CT-GPH-A-8
Fuse Rated voltage: ≥ 500 V; rated
current: 6 A
Knife Rated voltage: ≥ 500 V; rated
switch box current: ≥ 6 A; number of
phases: three
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Overview
Type Quantity
purchased from
Huawei
Prepared by the 3 PCS
customer
Prepared by the 1 PCS
customer
17